Kontaktieren Sie uns Anruf
  1. Althen Controls
  2. Drehwinkelaufnehmer & Positionssensoren
  3. Lineare Positionssensoren & Potentiometer
  4. Lineare Potentiometer
  5. 18FLPC Series Linear Potentiometer

18FLPC Series Linear Potentiometer

Conductive Plastic Model, shaft with a ball tip and fixing nail mounting to the body

TECHNISCHE SPEZIFIKATIONEN

Eigenschaften

  • Industrial conductive plastic model
  • Measurement range: 25 mm and 50 mm
  • Resistance value: 500 Ω to 10 kΩ
  • Linearity tolerance: ±0.5%, ±0.2% and ±0.1%
  • Body dimensions (mm): 18x18x63 or 18x18x68

About the 18FLPC Series Linear Potentiometer

The 18FLPC has a connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft.

In the 18FLPC Series we have the 18FLPCC25RE and the 18FLPCC50RE.

Special Specifications available

Higher resistance value (20kΩ, 50kΩ [50kΩ is available for 18FLPCC50RE only] ), Stroke 75mm (S18FLPCC75), stroke 100mm (S18FLPCC100), stroke 150mm (S18FLPCC150), stroke 200mm (S18FLPCC200), sealed type (IP54, the length of "A" is extended by abt. 12mm), with spring return device (available 75mm & 100mm stroke, friction is approx. 3N [300gf]. Spring return device is mounted on the outer shaft), with a cardan joint (without spring return device). Extra taps (available up to 1 tap and only on the version with a connector). In case of leadwire terminals, the dimensions are as the right drawing: (the dimensions of "A", "B" & "L" are the same as above table), leadwire length is 1m.

Benötigen Sie diesen Sensor für Ihr nächstes Projekt?

Fordern Sie jetzt ein Angebot an oder lassen Sie sich kostenfrei von unseren Experten beraten!

Angebot anfordern

  • Schnelles Feedback
  • Maßgeschneiderte Angebote
  • Kostenlose technische Beratung

18FLPC Series Linear Potentiometer

 Kontakt

Maßgeschneidert nach Ihren Anforderungen

Nicht das richtige Produkt? Wir bieten Ihnen sowohl Standard Sensoren als auch maßgeschneiderte Produkte und komplette Messlösungen. Bitte kontaktieren Sie uns für eine Beratung oder ein unverbindliches Angebot!

Kontakt

Technische Spezifikationen

Spezifikationen Wert
Precision class Precision class: ±0.2%, ±0.1%
Contact resistance variation Within 2% C.R.V.
Dielectric strength 1 minute at 500V.A.C.
Friction Within 3N (300gf)
Independent linearity tolerance Standard class: ±0.5%
Insulation resistance Over 1.000MΩ at 500VDC
Mass Approx. 100g, approx. 150g
Output smoothness Within 0.1% against input voltage
Power rating 0.5W, 0.75W
Resistance temperature coefficient ± 400p.p.m./°C
Resolution Essentially infinite
Standard resistance values 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ
Stopper strength Approx. 90N (9kgf)
Stroke 25mm, 50mm
Total resistance tolerance ±10%
With spring return device Fitted (standard)