Industrial finger and thumb controlled joysticks

Are you looking for joystick controllers? We always deliver our controllers quickly. We inspect and optimize these joystick controllers thoroughly according to your wishes. You can expect extremely good quality. We have the following joysticks in stock for you:

• Fingertip Hall Efect joystick
• Finger-controlled joystick
• Non-contact joysticks
• Potentiometer joystick
• Multi-axis controller
• Thumb-controlled joystick
• Handgrip hall effect joystick
• Fingertip joystick single axis
• Switch joystick
• Non-contact joystick

Finger and Thumb Operated Joysticks

Fingertip and thumb controlled joysticks are used for applications such as wheelchairs, robotic operations, medical instruments or when precision is essential.

HE1 Hall Effect Joysticks are available in 2 or 3 axis with options of 2 open or 4 gated limiters. Designed to fit cut outs of 1.63” or 1.75” diameter depending on mounting style the HE1 series has a choice of 21 handle styles including options for 1 or 2 top buttons and standard or z-axis handles. Electrically rated for a supply voltage of 5VDC with a mechanical life of 5 million actuations in all directions and sealed to IP50, IP54 or IP67 depending on handle options.

HE2 Series Hall Effect Joysticks are available in 2 or 3-axis with options of 2 open or 3 gated limiters. Designed to fit cut outs of 1.63” or 1.75” diameter depending on mounting style the HE2 series also has a choice of 6 handle styles including options for 1 or 2 top buttons and standard or locked z-axis handles. Electrically rated for a supply voltage of 5VDC with a mechanical life of 5 million actuations in all directions and sealed to IP67.

HE3 Series Hall Effect Joysticks are created with built in redundant sensors and are available in 2 or 3 axis with options of open square or guided feel gates. Designed to fit cut outs of 1.625” or 2.25” diameter depending on mounting style the HE3 series also has a choice of 6 handle styles including options for 1 or 2 top buttons and standard or locked z-axis handles. Electrically rated for a supply voltage of 5VDC with a mechanical life of 5 million actuations in all directions and sealed to IP67.

Hall Effect Finger Joysticks

These finger joysticks all work with the Hall effect principle. Industrial Hall effect joysticks are similar to traditional potentiometric joysticks. They both give a proportional electrical output signal that corresponds with the position of the joystick lever. The difference is that the operating principle of hall effect joysticks is based on contactless hall effect technology where a magnet underneath the moving joystick lever affects the electromagnetic field that is generated by an hall effect sensor beneath the magnet. The advantage of hall effect technology over potentiometric technology is that there is no contact between the sensor and the moving magnet. Therefore the sensor element does not wear out by repetitive movements and heavy vibrations which results in a longer life expectancy.

MFD series multi-function USB desktop controllers comes in complete units with a choice of switch layouts for the left and right side of the unit. Offering a blank plate, single button or 3 button layout which can be different for each side. Available with either a potentiometer joystick, hall effect joystick or hall effect control knob, the MFD series are highly customisable.

H30JH series is the low-cost version of a 3-dimensional coordinate type joystick controller incorpaorated a haal effect IC type resistive element. It offers long life expectancy and high reliability.

40JE series incoporate code switches of digital output instead of potentiometers. The standard version offers a spring return device.

40JB series are low-cost version miniturized joystick controllers with a wide operating angle.

30JB series are extremely small. A 3-dimensional coordinate type is also available. Spring return device is incorporated inside the housing case. It automatically returns an operating lever tot the center position.

H30JL series are 1-dimensional coordinate type joystick controllers wirh an incorporated hall effect IC type resistive element.

H40JH series are a low-cost version of a 3-dimensional coordinate type joystick controller. A hall effect IC type resistive element is incorporated. It offers high-protection and several special outputs.

30JE series are a modified versioen of the 30JB. Instead of potentiometers, swithces are incorporated inside the housing case. A spring return device is incorporated inside the housing case.

30JH series are a low-cost version of a 3-dimensional coordinate type joystick controller. Spring return device and dust-proof rubber cover are fitted in the standard version.

Cobra Joystick Controllers

HMC60JH series with a mini-cobra shaped knob. The dead-man switch on the knob is available for safety design.

C90JA and JB series are mounted with a cobra shaped knob. It suits multi-directional operations such as robotic applications. It is possible to operate complex fuctions with push button switches and seesaw motion potentiometer incorporated in the knob.

Questions or a product enquiry?

Do you have questions about these joystick controllers or need budgetary pricing? We will be glad to help you!